T60W-1200-6 Baking 60℃ Auto Dry Cabinet is a plug and play, fully auto dry cabinet which will be stable at 60℃ and ＜1%RH. It is especially designed for moisture sensitive SMD packages to comply with
J-STD-033C.
Baking 60℃ Auto Dry Cabinet with 4 main functions:
Wider application in resetting the floor life: Moisture sensitivity SMD packages which are exposed to the air and exceed the floor life should be stored in the T60W-480 for resetting the floor life. (see
J-STD-033C table 4-1, 4-3.) For example: If MSD parts of MSD Level 4,5 and 5a are exposed for less than eight hours, they can be stored in a dry cabinet for resetting the floor life. However, if their exposure time is longer than eight hours, the SMD packages should be stored at 40℃ in a T60W-480 to reset the floor life.
Labor saving: SMD packages shipped in low temperature carriers may not be baked in a traditional high temperature oven with the temperature higher than 60℃, as it will cause deformation of the carriers. Storing in a T40W-480, operators do not need to remove the SMD package to thermally safer carriers. It saves labor cost and eliminates the chance of damaging the carriers.
Embedded Alarm: The temperature or relative humidity of interior cabinet exceeds the preset value will activate the embedded alarm of buzz and flash in the control panel.
Memo cards: Special "Slash Door" design to allow inseting the memo cards which can record the necessary storage information of MSD management.
