T40W-1200-6 Baking 40℃ Auto Dry Cabinet is a plug and play, fully auto dry cabinet which will be stable at 40℃ and ＜5%RH. It is especially designed for moisture sensitive SMD packages to comply with J-STD-033C
Baking 40℃ Auto Dry Cabinet with 4 main functions: Wider application in resetting the floor life:
Moisture sensitivity SMD packages which are exposed to the air and exceed the floor life should be stored in the T40W-480 for resetting the floor life. (see J-STD-033C table 4-1, 4-3
.) For example: If MSD parts of MSD Level 4,5 and 5a are exposed for less than eight hours, they can be stored in a dry cabinet for resetting the floor life. However, if their exposure time is longer than eight hours, the SMD packages should be stored at 40℃ in a T40W-480 to reset the floor life.Labor saving:
SMD packages shipped in low temperature carriers may not be baked in a traditional high temperature oven with the temperature higher than 40℃, as it will cause deformation of the carriers. Storing in a T40W-480, operators do not need to remove the SMD package to thermally safer carriers. It saves labor cost and eliminates the chance of damaging the carriers.Embedded Alarm:
The temperature or relative humidity of interior cabinet exceeds the preset value will activate the embedded alarm of buzz and flash in the control panel.Memo cards:
Special "Slash Door" design to allow inseting the memo cards which can record the necessary storage information of MSD management.